Release notes

v7.1

  • Prod MIDI tracks, Right click in the arrange view and choosing "Insert" submenu will reveal a "MIDI Prod tracks" section to allow MIDI Program Change or Notes tracks.
  • If you own WAVES tunes, the MIDI Prod track will support an external portable install of REAPER to run Live instances of WAVETunes that independent of the REALIVE.  To be able to run it at very low buffer settings without affecting REALIVE.  It is still all controlled by REALIVE via MIDI
  • Audio Device automatic changes for OSX computers.
  • Several minor Bug Fixes in the ProjectTabList window
  • New LineCheck function supports a lot more Track names.  If a track in the Audio Routing tab has a supported name, hitting the linecheck button will play its name.
  • Linecheck can be enable in the Audio Device menu in the main toolbar
  • Building a conductor track better support the marker names in the index.  If a name is previously found, it will be indexed if found again.
  •  Hitting playback will always reset the Playrate to 1
  • Hitting letter "B" will solo and play the Original track
  • 60Hz refresh rate for a more responsive GUI and better timing for seeking function

 

v7.092

  • -All time signatures Counts are now supported

  • Project Tab List,  Option to tint the items according to the previous Separator in the list

  • Added a preference to automatically add Formant correction to the Vox Tracks when Changing Pitch to project

  • Changing the Pitch to a project will better support all item regardless of their current Pitch setting.

  • 6/8, 9/8, 12/8 a re now natively supported with the counts adjusting to the time signature.

  • Project Title Window: Pitch and Drone supports Mouse wheel

  • If trying to playback while the audio device is not present, ask to select another device. (OSX only)

  • Build Click Track: Better support of time signatures...

  • When entering a new cue, play it in the QsBd bus even if in Live mode.

  • Changing Pitch does not affect the Prod MIDI stuff

  • Changing Pitch from key to key does not go past -6 or +6, if an item would yield to over +6 semitone or under -6 semitone, Roll over to the other limit.

  • Changing to double time feel from a triplet feel time signature leaves the division unmuted

  • Added Qs Piano Bell Note Functionalities:  When hitting [Q] to show the "New cue at cursor" menu, you now have the choice to add guide piano notes.  Either a single note and various chord.  It will be played in the QsVx bus.  You can move it to the QsBd if you choose so.

  • Next section Window always show the next non visible region

  • Starting playback from the beginning did not zoom properly: fixed

  • In the Project tab list, entering a separator tab will color-code the next section

v7.089

  • Save As All Project to folder can now be aborted while it is copying the Audio file
  • Auto-Detect current available Audio device improve: Is not in function while REAPER is not foreground

v7.087

  • Save As All Project to folder can now be aborted while it is copying the Audio file
  • Adding a loop action Marker will always add it to the beginning of the region
  • Prevent Offset seek to the same region.


v7.085
  • Drone pad can now be set and modified directly from the Project Title window.  Just over the top Left corner of the Project Tiltle window.
  • Fixed a few Drone Action marker chasing so that the drone is always updated properly when initiating playback
  • The project key can be edited directly from the project title window: Option click it to delete it, Hover and scrol wheel to change the key.
  • Scaling the whole GUI using SHFT-CMD-Scroll wheel
  • All "Next song" action markers can be activated to a configured bar in the destination project.
  • Hit "K" to enter a Action marker, "Q" to enter a new guide cue.
  • Fix REALIVE Render oddities...
  • OPT-CMD Scroll wheel to move item from track to track in the arrange view.  Hover the tcp to move the Tracks instead
v7.080
  • SMPTE Timecode is now global through all currently opened projects.  It can be chosen directly from the Timecode window at the bottom left in the live view.
  • Auto-Detect current available Audio device.  While no project is playing, new audio devices are automatically detected.  You can optionnally switch to them is you want.  OSX only (OS limitation)
  • While playing back, moving with force seek shortcuts, does not move the edit cursor.
  • In the audio routing view, several menus are added in the transport.
  • Transport times top right of Transport window, will now reflect the currently selected Projects from the playlist.
  • Project tab list: reworked the Right Click menu.
  • In the audio-routing view, the "Routing" menu include a "Enable hard limiters on busses" to bypass the track's Hard Limiters to save CPU
  • When selecting a new audio interface, selecting a multi-out device unsoloes the master fader, selecting a stereo out device, soloes it to avoid double sends between individual tracks and master out.
  • When building a new conductor track, if the tempo in 60bpm or less, ask for triplet feel click.
  • Metronome menu, added a mute wholebar click menu item
  • Contextual Loop mode: in this mode, triggering the loop button or [L] button will loop these (in order of appearance) if present:
      1. Current area selection 
      2. Current time selection
      3. Loop points
      4. Current region
      5. Current measure
  • Audio device menu in the main toolbar.  The Audio device setting can be selected directly from there.  OSX only (OS limitation)
  • Audio device menu in the main toolbar.  The buffering setting can be selected directly from there.
  • Immediate seeking actions to force seeking immediate in the action list.
  • In the metronome menu, "Add running click" action to add a single beat before the song to make a running click.  Look for it in the metronome menu on the transport bar.  Disabling looping starts the song.

  • Control surface focusing the app is now a preference.  To allow triggering REALIVE while showing another app.  ("Control" button in the main toolbar)

  •  If changing the click track to triplet feel, you can now make a time selection or place your edit cursor at a specific place to do only a section of the song.

  •  Several minor bug fixes... 

v7.072
  • It is now possible to select several projects in the list to organize them and render them in one operation. Shift or cmd click the project prior to do your function.
  • Tempo list manager: View menu or in the Metronome/Tempo button on the transport bar.
  • Transport bar now reflects the play/loop states
  • In tempo view, CMD-Scroll wheel disables the items' stretching to tempo
  • In tempo view, OPT-Scroll wheel while playing forces the tempo change immediately
  • Add Prod MIDI track for CCs and Program Changes: Right-Click on a track or on the timeline and go to the "Insert" section
  • LOOP/Add action/Add Cue in the main toolbar now triggers menus
  • ZOOM UI function: There's also a Right click menu on the transport bar
  • SHIFT-CMD-ScrollWheel: is now a contextual ZOOM between TCP, MediaItems and Transport Bar.  Just Hover on desired section.
  • As a safety, the SMPTE track cannot be routed to any audio hardware used outputs.  If you try to do so, hitting play will disable the outputs in the routing window.
  • In the main toolbar, Mute/UnMute buttons for the original tracks and vocal tracks
  • In the main toobar, the Auto-Stop button trigger the Project Ending menu
  • Under certain circumstances, the wrong playlist item was colored while in the audio routing tab.  FIXED
  • REALIVE Render: while multi rendering, the Routing's muting is respected.
v7.067
  • Less CPU use on large setlists.
  • When inserting or updating a SMPTE track, if the cursor is not at the beginnig of the song, offer to use that position as a starting point.
  • Realive Render: tracks that were in the QsBand folder were not render.  FIX
  • On windows, the UI redraw is slower when changing window sets.  Implemented less redrawing for nothing.
  • Click and Pitch menu are now on the Transport Bar
v7.064
  • Control Trigger Switching Live/Tempo/Pitch view action: Press repeatedly to switch the views.  If you wait for more than 2 seconds between triggers, it will go back to the main live view.

  • Play function follows REAPER's snap mode.  If snap is enabled, playback will start from the beginning of the bar
  • When sorting after importing new Tracks, the updated folders will be sorted alphabetically
v7.062
  • Realive Render: tracks that were in the QsBand folder were not render.  FIX
  • OPT clicking the arrange window will paste the currently selected Media Item
  • Generating Click track did not stop at the Fermata marker.  FIX
  • Other small bug fixes
v7.059
  • While changing tempo while a song is playing, the change is more sync.
  • When engaging the solo click from stop avoid hearing a bit of audio coming thru
  • Prevent image stuttering when playing back while you have a lot of large projects are opened.
v7.058
  • bug fix: Click mute unmute on seek to other project
  • CountIn force to 1bar: Fix Corner case from 2bars to 1bars
  • Smoother GUI during playback with big projects
  • Conductor Tap Mode: Hitting [SHIFT-C] will enable the [,] and [.] keys to control payback speed.  This can allow for rubato playing.  Only works well with non rhythmic material. (Strings/Pads)
  • Seek to new tempo improve
  • LEXA Controller setup: Using the "Switch View" function, Switch from Audio Routing goes to Live View

v7.052

  • Generate Structure Track: Fix Bug with very small regions preventing building the regions properly
  • Conductor Track Menu, Fix sub menu not being created properly
  • Set item's playrate actions in action list and Media Item's Sub Menu
  • Set item's loop state  in action list and Media Item's Sub Menu
  • Fix corner cases in Bounce Script
  • Make Pref to force Refresh Cues on insert Markers
  • Click Menu: Reorganize menu
  • Bounce Script: Better Renaming
  • Bounce Script: Added Click & Cues function
  • Bounce Script: SMPTE is included in stems, Click and busses mode
  • Bounce Script: SMPTE is ignored in the mixdown

v7.048

  • Fix Bug: Change count-in length wouldn’t work if there was a marker at time 0
  • Realive_SoloTrack_AddNewAction.lua: This action will build new scripts to allows soloing certain specific track with a shortcut.  Works on Routing and/or on Songs.  Right click on a track and Select “Build solo action for track

 

v7.043

  • Line Check: Now
  • Measure Navigation now works
  • MIDI Cues Line Check
  • Fix bug with for certain cues that were not built
  • Media Explorer: Adding to sampler trigger sorting
  • Media Explorer: Insert to sampler action
  • Import Track Sort, Deleting Remaining Child Track
  • Zoom Out Temporarily, Show Message
  • Fix bug: While enabling Solo click make minimal play if playing from 0
  • Project Tab List: CMD Click to play works on non-active tabs.

 

v7.037

  • Fix bug for certain cues that were not added when selected
  • Required SWS version is now 2.14.0.1

 

V7.035

  • Mute click and smpte when going to next song with "immediate play" action markers
  • In the Click Menu: Prevent Click change note if Global Click is not enabled.
  • While Sorting tracks.  Delete the dummy track on folders that have been filled
  • Web Remote: show Edit cursor marker position, Inform when Seeking
  • Realive_MuteTrack_AddNewAction.lua: This action will build new scripts to allows muting certain specific track with a shortcut.  Works on Routing and/or on Songs.  Right click on a track and Select “Build mute action for track
  • Building a click track with a 6/8 song will convert it to 2/4
  • Tempo window support with 6/8 time signature: Right click on Tempo window to show 6/8 tempo
  • Ableton import: convert 6/8 projects, Ask to ignore non Audio/Midi tracks, Mute Guide/Click tracks
  • Better “Windows” support: Cleaned a few bugs
  • Added a Spanish 2 Voice pack with an another female voice.  More cues are now available
  • Added a preference to auto send a Program Change on song change

 

V7.033

  • Entering an action marker over another replaces it.  Else it is added next to it.
  • Add Next Song Menu more options
  • Realive Logo on Window Message
  • ProjectTabList: Deprecate Refresh playlist display function
  • CountItem Cycle: Don't show edit view if in Live Mode
  • Realive Prod MIDI Tracks functionality:  Right click on the timeline and you can enter midi notes for Resolume triggering, for Easy Worship (In 2 modes if two Easy worship are used)

 

V7.025

  • Better support for non English characters in the Title Window
  • Minor bug fixes…

 

v7.022

  • Temporary samples have been added for separate instruments single cues: (Band, Drums, Bass, etc…) and (In, Solo, Drop, ), The samples will eventually be redone.
  • Bug Fix, in certain circumstances, the Click & Cues could be routed to the main out when changing sound interface
  • The “Find tempo” is experimental and not reliable all the time,  Added a warning message when using it.
  • When adding a cue, it is automatically played.

 

v7.019

  • Click menu: Independently selecting click accent notes.  You can now decide which accent you want for each click track. (Wholebar, Beat, Div)
  • Routing Menu: Uppdate click  and cues routing action.  If needed, you can manually set it.
  • Samples is played when inserting it while no songs are playing
  • In the project tab list, change song to separator type

 

v7.0

  • The audio routing window has been redesigned with its own Toolbar.
  • The audio device availability is automatically refreshed and announced if un unavailable
  • Click and cues can now be triggered globally from the audio routing.
  • New “Add cues” menu hitting the [Q] key. 
  • New “Add Action Marker” menu hitting the [K] key.
  • Section repetition has been enhanced.  You now know if a section is repeated several times and when the last time is coming.
  • A new solo click “freewheel” mode has been added.  Allowing the percs to keep playing while the click is soloed
  • Ableton live sessions can now be directly imported in REALIVE (Still in experimental state)
  • The transport bar buttons now supports REALIVE functionalities
  • The transport bar now has a section to show times vs full setlist length.  Useful to know how long you have until the setlist ends.
  • A “click menu” button has been added to the transport bar.  Several click related functions are found there.
  • Seeking to a section start can now optionally trigger a cue and a count
  • A “next section window” has been added to show the upcoming section when not visible.
  • Live looping mode can be activated to trigger several loops separated in project tabs and keep them in tempo.  They can be triggered with keyboard shortcuts or anything else.
  • A preference to keep the video opened while changing views.
  • On REALIVE startup a “recent RPLs” menu is shown.
  • Improve play button’s responsiveness.
  • REALIVE Render GUI window
  • Some corner cases fixes in the tempo changing logic to keep everything in sync.
  • The division click can be reassigned to the same sound as the beat click
  • The mouse wheel button will move the playhead to the mouse cursor, snapping to the bar while on live mode.
  • A few minor enhancements to Amalgama’s great renamer, (Named Realive_Reanamer.lua in the action list)
  • Several new Realive preferences added in the “Options” menu
  • Project playlist several little enhancements. (Copy playlist to clipboard)
  • Consolidate everything function to save everything to a folder.
  • In the Tempo View, a “Keep time position” button has been added to set the project timebase to ”time”
  • Low latency playback trigger: Avoid long wait before playback is initiated.